Stainless Steel Perforated Mesh With Good Wear Resisting Perforated Metal Mesh
Stainless Steel Perforated Mesh Introduction:
Stainless steel perforated metal mesh has good corrosion resistant performance in air, steam, water and other weak corrosive medium. It has high strength and wear resistance, which supports the longer service life than mild steel.
Among all the materials, stainless steel is the most economical one and you can find it widely used in our life.
Material:
304 (S30400) – It has high temperature resistance, good processability and high hardness. It is widely used in industry, medical treatment, food, architecture and other industries.
304L (S30403) – It is a kind of extra-low-carbon stainless steel of 304. It reduces carbon deposition during welding. In addition, its welding property is higher than 304.
316 (S31600) – A certain amount of Mo elements are added in 316, which can improve the resistance against high temperature, corrosion and wear. It is widely used in marine works, chemical industry, medical treatment, construction and other industries.
316L (S31603) – It is a kind of extra-low-carbon stainless steel of 316. It reduces carbon deposition during welding. In addition, its welding property is higher than 316.
321 (S32100) – A certain amount of Ti elements are added in 321. It can maintain the stability under the condition of severe corrosion. It is highly corrosion resistant, high temperature resistant, wear resistant and creep resistant. It is widely used in oil, chemical, medical treatment, aircraft and other industries.
430 (S43000) – 430 stainless steel has better thermal conductivity and corrosion resistant performance than 300 series. 430 stainless steel can resist the corrosion of nitric acid and some organic acids. It is widely used in chemical, laboratory and other corrosive environments.
| |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Others |
| 304 | min. | – | – | – | – | – | 17.5 | – | 8 | – | – |
| max. | 0.07 | 2 | 0.75 | 0.045 | 0.03 | 19.5 | – | 10 | 0.1 | – |
| 304L | min. | – | – | – | – | – | 17.5 | – | 8 | – | – |
| max. | 0.03 | 2 | 0.75 | 0.045 | 0.03 | 19.5 | – | 10 | 0.1 | – |
| 316 | min. | – | – | – | – | – | 16 | 2 | 10 | – | – |
| max. | 0.08 | 2 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | 0.1 | – |
| 316L | min. | – | – | – | – | – | 16 | 2 | 10 | – | – |
| max. | 0.03 | 2 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | 0.1 | – |
| 321 | min. | – | – | – | – | – | 17 | – | 9 | – | Ti = 5 (C + N) |
| max. | 0.08 | 2 | 0.75 | 0.045 | 0.03 | 19 | – | 12 | 0.1 | 0.7 |
| 430 | min. | – | – | – | – | – | 16 | – | – | – | – |
| max. | 0.12 | 1 | 1 | 0.04 | 0.03 | 18 | – | 0.75 | – | – |
| Mechanical Property |
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation at Break in 50 mm (%) | Hardness |
| min. | min. | min. | Rockwell Hardness | Brinell Hardness (HB) max. |
| 304 | 515 | 205 | 40 | 92 | 201 |
| 304L | 485 | 170 | 40 | 92 | 201 |
| 306 | 515 | 205 | 40 | 95 | 217 |
| 306L | 485 | 170 | 40 | 95 | 217 |
| 321 | 515 | 205 | 40 | 95 | 217 |
| 430 | 450 | 205 | 22 | 89 | 183 |
Parts of Specifications:
| Hole Diameter | Staggered Centers | Sheet Thickness | Open Area |
| 0.045" | 1.14mm | 0.66" | 0.033-0.039" | 0.84-0.99mm | 37% |
| 1/16" | 1.59mm | 3/32" | 0.027-0.033" | 0.68-0.84mm | 41% |
| 1/16" | 1.59mm | 1/8" | 0.027-0.066" | 0.68-1.68mm | 23% |
| 5/64" | 1.98mm | 1/8" | 0.027-0.053" | 0.68-1.35mm | 35% |
| 0.081" | 2.06mm | 1/8" | 0.053-0.066" | 1.35-1.68mm | 38% |
| 3/32" | 2.38mm | 5/32" | 0.053*0.066" | 1.35-1.68mm | 33% |
| 1/8" | 3.17mm | 3/16" | 0.027-0.127" | 0.68-3.23mm | 40% |
| 5/32" | 3.97mm | 3/16" | 0.027-0.056" | 0.68-1.68mm | 63% |
| 3/16" | 4.76mm | 1/4" | 0.027-0.127" | 0.68-3.23mm | 50% |
| 1/4" | 6.35mm | 3/8" | 0.033-0.011",0.25" | 0.84-2.82mm,6.35mm | 40% |
| 3/8" | 9.52mm | 1/2" | 0.053-0.082",3/16" | 1.35-2.08mm,4.76mm | 51% |
| 3/8" | 9.52mm | 9/16" | 0.059",0.119" | 1.5mm,3.02mm | 40% |
| 1/2" | 12.7mm | 11/16" | 0.033-0.127",3/16" | 0.84-3.23mm,4.76mm | 48% |
| 1/4" Hex | 6.35mm | 0.285" | 0.027-0.033" | 0.68-0.84mm | 76% |
| 3/8" Sq | 9.52mm | Cane" | 0.053-0.066" | 1.35-1.68mm | 51% |
Other Specifications according to your requirements.
Features:
has good corrosion resistant performance in air, steam, water and other weak corrosive medium. It has high strength and wear resistance, which supports the longer service life than mild steel.
Hole Patterns including:
Round; Rectangular hole; Square; Triangle; Diamond; Slotted Hole; Hexagonal; Cross; Slotted; and other patterns according to your drawings or application requirement.
Applications:
Architecture
Chemical industry.
Paper industry.
Pharmaceutical industry.
Automotive & Transport.
Filter
Furniture
Decorative
Speaker Grille
Packing:
Our Perforated Metal Mesh List:
Round hole perforated sheet
Square hole perforated sheet
Slot hole perforated sheet
Decorative Perforated Sheet
Embossed sheet
Perforated steel sheet
Perforated stainless steel sheet
Perforated aluminum sheet
perforated copper or brass sheet
Etched plates
Perforated metal noise barrier
Perforated filter form SS, carbon steel, aluminum, or copper sheet
Perforated tube
Perforated sunshade panel
Perforated kinetic facade
Anti-skid stair steps
Hexagonal hole perforated metal
Louver hole perforated metal
Raised Perforated Metal
Nickel perforated metal
Galvanized perforated metal
Carbon steel perforated metal
Perforated metal for filter
Perforated Metal for facade
Product Tags:
|
|
Wear Resisting 0.5mm Perforated Metal Mesh Stainless Steel S30400 Images
|
